12V 60 W Motor Oil Change Pump Extractor Oil Diesel Fluid Suction Transfer Pump

Description: Product Description 【12V 60W Oil Extractor Pump】Included: 1 x Pump; 1 x Outlet Hose; 1 x Inlet Hose; 2 x Hose Clamps; 2 x Battery Clamps; Ideal for Motorcycles,Cars,Quads,Truck,Boat, Forklift,Generator,Tractor,Scooter and Other 12v Vehicles. 【Specification】: Oil Diese extractor pump's Voltage: DC12, Maximum current: 5A, Maximum power: 60W. Perfect for quick and easy oil changes that you can do at home. 【Quick and Clean】Ideal Equipment for quick and clean oil-changes. The oil will simply draw out the motor through the oil dipstick bore. Simple On/Off Power Switch, easy to use 【Note】This high efficient self-priming oil extractor pump is easy to pump various fluids and oils. But pls note that NOT suitable for extracting: water (no lubrication of the pump), gearbox-oil (too viscous). 【Easy to Use】You just need to place the inlet/outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button.Ideal Equipment for quick and clean oil-changes. The oil will simply draw out the motor through the oil dipstick bore. Oil Change Pump Extractor Extracting motor oil from your vehicle without Mess & Specialised. It can be used for your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc. WARNING: This product can not use to extract water, gearbox oil or flammable liquids(such as fuel, petrol, gasoline) Specificaiton： Input Voltage: DC 12V Wattage: 60W, Current: 5A Motor Oil (40-60 degrees) Flow Rate: approx. 1L / min Diesel or heating oil: approx 250 L/H Sound pressure level:70dB(A) Battery Clamps Black for Cathode Red for Anode Changing the polarity of the power supply will change the direction of oil discharge Easily Connect Please connect it correctly, otherwise it is easy to malfunction. It is mainly used to extract waste gas from the car, not to refuel. Warm Tips We recommend a short break after 10 minutes continuous usage (should not exceed 30 minutes) to allow the unit to cool. Clean this pump after use, you can flush with washing detergent and then run with fresh transmission oil to run out water/detergent. Package Included 1 x Pump 1 x Outlet Hose 1 x Inlet Hose 2 x Hose Clamps 2 x Battery Clamps 1 x User Guide Easy Operation: Warm up the engine for about 5 minutes to reduce the oil viscosity. It's important that the engine oil is warm (not hot) when extracting. Turn off the engine and loosen the filler cap (for the time being) Connect the power clip of the pump body directly to the battery Remove the oil level gauge and insert the thin hose of the pump. (Notice if you put it to the innermost very quickly,it won't work) Gradually insert the hose while operating the pump. When it is inserted to some extent,the operating noise will change and the oil will start to be sucked up. Put the thick discharge hose on the waste oil tray. (If you put it directly in the waste oil treatment box, you will not know the amount of waste oil collected.)

Price: 25.99 USD

Location: Azusa, California

End Time: 2024-09-05T06:01:09.000Z

Shipping Cost: 0 USD