Audix DP7MICRO 7-pc Drum Microphone Pack w/ MicroD Mini Condenser Mics

Description: DJ GEAR INSTRUMENT GEAR LIVE SOUND RECORDING MICROPHONES HEADPHONES ACCESSORIES SOFTWARE LIGHTING BUNDLES Authorized Dealer Audix DP7MICRO 7-pc Drum Microphone Pack w/ MicroD Mini Condenser Mics 7-pc Drum Microphone Pack w/ MicroD Mini Condenser Mics - Open Box - Description Live Sound Or Recording The DP7MICRO drum pack contains seven microphones to mic a standard 5-piece drum kit: kick, snare, rack toms, floor tom and stereo overheads. Perfect for stage or studio, this combination of dynamic mics featuring exclusive Audix VLM capsule technology and the MicroD condenser mics offer accurate sound reproduction in very high SPL applications. Mic clips, mounts, and rugged aluminum carrying case are included. Professional set of 7 drum mics for stage or studio ADX51 condensers for overheads add spacial dimension Easy to set up and position Mics work in tandem to replicate each drum accurately and independently Close Miking The D6 for kick drum and the i5 for snare are considered must haves for every drummer. The kick and snare are considered the core of any drum kit and the foundation for every groove. Close miking ensures that they will be captured in the mix. If either the kick or the snare is unable to be heard, there is simply no groove. The MicroD, known for its clarity, excellent transient response, resistance to feedback, SPL (Sound Pressure Level) handling is perfectly tailored for toms and floor toms. These premium microphones, in conjunction with a close miking technique, are guaranteed to capture the attack and percussion sound of each drum. Also, by having the mic close to the source of the sound, it helps to isolate and control the sound of each drum Overhead Miking (Ambient) The ADX51, a pre-polarized condenser microphone with a 14mm gold sputtered diaphragm, is designed with overhead applications in mind. Due to its cardioid pickup pattern, high sensitivity, and slim pencil design, the two ADX51 mics can be easily positioned overhead to provide an accurate stereo image of the entire drum kit. The Blend With contemporary music and the volumes typically generated on stage, it is more practical and effective to create a blended effect of close miking and a stereo image of the entire kit from overhead.The D6 will help provide the earthshaking lows and the attack of the kick; the i5 will reinforce the depth and crack of the snare; MicroD’s maximize transient attack and overtones of the toms, and the ADX51 overheads will pick up the hi-hat, cymbals, and the ambience of the entire kit. With the DP7MICRO, drums will maintain their sound integrity and critical presence, regardless of the size of the room and PA system INCLUDES Packaged Set Of 7 Drum Mics Aluminum Road Case 1 x D6 Kick Mic 1 x DCLIP Mic Clip 1 x i5 Snare Mic 1 x MC1 Mic Clip 1 x DVICE Rim Mount 3 x MicroD Tom Mics 3 x DVICEMICRO mounts 3 x APS910 power adapters 3 xWS10 windscreens 2x ADX51 Overhead Mics 2x WS81C Windscreens User Tips D6 - Kick Drum To position the D6, a good starting point is a few inches inside the port of the front head with the mic pointing off-center and not directly at the beater. For more attack, move the mic closer towards the beater. For more bass, pull the mic farther away from the beater i5 - Snare A good starting point is 2 inches above the rim with the mic pointing towards the center of the head. For more “rim” sound, pull the mic closer to the rim. For more resonance and depth of field, pull the mic farther away from the head. The trick is to find the right balance between resonance and attack while still controlling bleed from the other drums. MicroD – Toms The provided DVICE clip is spring loaded to clip on the rim of a drum.The inside slider portion of the clip should be attached to the bottom part of the rim first and the clip lifted up and over the top rim for a tight tension fit. You can adjust the position of the gooseneck by means of the lower thumb screw on the DVICE. The mic itself is generally positioned 2-3 inches off the drumhead and slightly inside the rim pointing towards the head ADX51 - As overheads The most common positioning concept is to keep the snare as the focal point and move the mics into various left and right positions equal distance from the snare; 4 feet is a good starting point. For best results, keep the mics in a vertical position, keeping in mind that you are not necessarily just miking the cymbals but the whole kit. You will find after some experimentation that the kick, snare, and overheads will provide most of your sound while the tom mics are used for sweetening ADX51 - One for hi-hat, one for overhead The ADX51 for high hat should be placed 2-3 inches above the top cymbal and towards the outside edge. The overhead mic can be placed overhead above the cymbals, generally above the rack toms. In the case where there are more cymbals on one side of the kit than the other, the mic can favor the side with the most cymbals Features/Specs i5 Transducer : Dynamic VLM Type B Frequency Response : 50 Hz - 16 kHz Polar Pattern : Cardioid Output Impedance : 280 ohms Sensitivity : 1.6mV / Pa @ 1k Off-axis rejection : >23dB Power Requirements : None Materials/Finish : Zinc Alloy / Black Finish MICROD Transducer : Pre-Polarized Condenser Frequency Response : 40 Hz - 20 kHz Polar Pattern : Hypercardioid Output Impedance : 250 ohms Sensitivity : 5.6mV / Pa @ 1k Off-axis rejection : >21dB Power Requirements : 9-52 V Phantom Materials/Finish : Machined Brass Capsule /Black Finish D6 Transducer : Dynamic VLM Type E Frequency Response : 30 Hz - 15 kHz Polar Pattern : Cardioid Output Impedance : 280 ohms Sensitivity : .8mV / Pa @ 80Hz Off-axis rejection : >20dB Power Requirements : None Materials/Finish : Machined Aluminum / Black Finish ADX51 Transducer : Pre-Polarized Condenser Frequency Response : 40 Hz - 18 kHz Polar Pattern : Cardioid Output Impedance : 100 ohms Sensitivity : 17mV / Pa @ 1k Off-axis rejection : >15dB Power Requirements : 9-52 V Phantom Materials/Finish : Brass / Black Finish We are authorized dealers for all these brands. Click a logo to see our listings. ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge. If an item is refused by the buyer, ship costs to and from the destination in which the item was shipped to are not refunded. Please note the cost of return shipping is usually double of what the original ship cost. Shipping is not free to HI, AK, and PR. FREE SHIPPING ONLY TO THE LOWER 48 STATES. We provide free shipping to the contiguous 48 United States, on most items. Shipping fees to ALL OTHER LOCATIONS will be calculated individually and added to customer invoices. ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge. In the event that the customer refuses a shipment, all shipping costs to and from the country or State in which the item was shipped to are not refunded. Please note, in some cases return shipping can cost as much as double the original ship cost. We operate a 30-day return period. Items must be returned with all original packaging as well as all included items. Items that are not returned in original, resalable condition are subject to a 15% restocking fee. We charge a 15% restocking fee on returned items only if the item is clearly used and or the packaging is tarnished. A 10% re-stock is more likely if the unit comes back in mint condition. The ship cost we paid to ship your item will be deducted as well. In some cases restock fees and ship costs can be applied as a store credit. We will exchange a defective unit for the same unit within the 30-day period. After that period, you will have to work directly with the manufacturer for warranty service. Items that can not be returned include: software, units with contents or packaging that is damaged/missing, and items that are considered for personal use (such as earphones, headphones, microphones, instrument mouthpieces, harmonicas or other items that you wouldn't want to purchase if someone else had previously used them). Also, Items which we do not normally stock (i.e. "Special Orders", discontinued products, close-outs, used products, etc.) are non-returnable. We strongly suggest that you check your order after receiving it to be sure that it is in proper working order. Please contact us for a Return Authorization before returning any items.

Price: 1099.99 USD

Location: Winchester, Virginia

End Time: 2024-11-29T21:16:30.000Z

Shipping Cost: 0 USD