BDS 8.5" LIFT KIT, NITRO SHOCKS, LONG ARM, 1984-2001 JEEP CHEROKEE XJ DANA 35

Description: You are bidding on a Brand New BDS Suspension 8.5" Lift Kit with Nitro NX2 Series Shocks & Leaf Springs. Compatible with 1984-2001 Jeep Cherokee XJ with Dana 35 Rear Axle (Part #BDS1442H). Maximize the capability of your 1984-2001 Jeep Cherokee XJ with this 8.5-inch lift kit with long arm conversion from BDS Suspension. Designed to improve stance this kit includes everything necessary to set your truck up right with clearance for up to 33" tires. By maximizing the length of both the upper and lower control arms, BDS has minimized caster change for optimal handling and minimized road forces. The control arm geometry is setup with a massive belly pan that incorporates the link mounts and is built to smash rocks. Up front the lift kit includes a belly pan with new pivot mounts, heavy duty lower flex arms and adjustable upper flex arms to optimize handling characteristics, 8.5" Pro-Ride coil springs capable of full coil bind and bump stop extensions to control the compression travel, but increase wheel travel. Also included are braided stainless steel brake lines, ultimate sway bar disconnects, and front adjustable track bar with flex joint fits into the existing frame mount and a drop pitman arm to improve the steering and handling geometry. The rear kit utilizes Glide-Ride leaf springs for maximum travel, stainless braided brake line, 2" lift blocks, and extended shackles that let the spring flex. Finish off the kit with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance. Long Arm Conversion: Upgrading the standard control arms to a long arm adds strength, improves handling and takes off-road articulation to the next level. This upgrade consists of massive 1/4" steel frame mounted brackets to install the oversized upper and lower formed long arms. The arms are formed for maximum tire clearance and allow the stock control arm tabs to remain on the vehicle. The upper arms are solid stock while the heavy wall tubular lower arms utilize oversized greaseable polyurethane bushings for superior road vibration isolation. Pro-Ride Coil Springs: A pair of full-length, Jeep-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind. NOTE: System only works with 4.0L motor and automatic transmission. '96 and earlier models may require a longer emergency brake cable. CV style rear driveshaft (not included) and slip yoke eliminator kit is required. The Jeep Cherokee was produced with two different rear axles (Chrysler 8.25 or Dana 35). You will need to measure your rear u-bolts to ensure that you get the correct new u-bolts. Basically, just measure the diameter of the axle or the I.D. of your rear u-bolts. Chrysler axles require 3" wide u-bolts and Dana 35 axles require 2-3/4" wide u-bolts. Some 1987-90 models came with a Dana 44. Recommended Tires & Wheels (Trimming May Be Required) 35 x 12.5 with 15 x 8 and 4 in. Backspace Some welding is required. Compatible with: Jeep: 1984-2001 Cherokee XJ Features: Redesigned 4-link long arm to improve articulation and offer better control throughout wheel travel ProRide coil springs offer improved ride quality and more articulation Massive belly pan that incorporates the link mounts and is built to smash rocks Glideride leaf springs to provide full lift height and increased capacity Sway bar quicker disconnects and extended rear link for improved off-road flex Front HD track bar to correctly position the front axle and control lateral movement Choice of NX2 gas or FOX 2.0 IFP performance series shocks for improved damping Allows clearance for 35" tires NX2 Nitro Series Nitrogen-charged Twin-tube design 10-stage velocity-sensitive valving Dual-welded ends for increased strength 1-3/8-inch high-flow piston Self-lubricating seals Silver powder coat finish Specs: Front Lift Method: Coil Spring Rear Lift Method: Leaf Spring Shocks Included: Yes Front Lift Height: 8.5" Rear Lift Height: 8" You can view and download the assembly/instruction booklet here, here, and here. We also have thousands of other High Performance Parts in our store. Shipping: There is no faster shipping on Ebay. If you pay for the item by 5:00 Eastern, Monday-Friday, we will ship it the same day. If it's after 5:00 EST, we will ship it the next business day. If you pay for the item on the weekend, we will ship it out Monday. Ebay now requires that sellers put a "handling time" on each item and "1 Business Day" is the shortest listed option. WE DON'T HAVE A HANDLING TIME. We ship same day in accordance with the paragraph above. No delays here. We want you to have the parts as bad as you do. We will be glad to ship internationally. Just send us a message for an international shipping quote. Accepted payment methods: We accept Paypal. If buyer doesn’t have a Paypal account, he or she can pay with Visa, Mastercard, or Discover through seller’s merchant account.

Price: 2966.35 USD

Location: Fort Smith, Arkansas

End Time: 2024-12-05T19:22:46.000Z

Shipping Cost: 0 USD