Brake line kit fits Toyota 1976 1977 1978 1979 1980 1981 1982 1983 1984

Description: Brake line kit fits Toyota 1976 1977 1978 1979 1980 1981 1982 1983 1984 With special lengths to fit your Toyota! Fits the following Toyota products: Toyota Avalon 1995 to 1996Camry 1983 to 1996 Celica & Supra 1971 to 1996Carina 1973 to 1971Corolla 1100, 1200, 1600, 1800 FX SR5 1975 to 1996Corona, MKII, Crown 1967 to 1982Cressida 1978 to 1991MR2 1985 to 1995Paseo 1992, 1995Starlet 1981 to 1984Supra 1990 to 1996Tercel 1980 to 1996Truck 4 runner 1984 to 1992Landcruiser 1975 to 1995Previa Van 1991 to 1996Pick-up HiLux 1975 to 1995Van Vanwagon 1984 to 1989 Buy for a future brake job!!! Will not fit any ABS Modules.This is a Truebend metal brake line replacement kit. All lines are supplied double-flared at each end with S.A.E. specified male inverted flare fittings attached with the special metric nut for Japanese built cars. These malleable lines are easy to bend or coil without collapsing the tubing or restricting the flow of brake fluid. Four couplers are included to join lines where necessary. Instructions are also included. The average Toyota takes 24 feet of brake line to do system to the wheels, this kit has 40 feet of lines in four inch increments to fit all the various configurations.Use the extra lines for another project!Here are the variety of lengths included in this kit: 6 inch 8 inch 12 inch 16 inch 20 inch (two of these) 23 inch 27 inch 30 inch 33 inch 37 inch 40 inch 43 inch 47 inch 51 inch 60 inch four unions to joint lines together instructions for installation A total of 20 lines and unions!! Our TrueBend® brake lines resist corrosion, vibration, fatigue and shock from impact. They are coated for corrosion protection in compliance with GM132M-ASV and SAE J527B. Each line is manufactured by double wrapping a copper coated steel strip to form a double wall tube. Then, the tube is furnace brazed to fuse the copper/steel tube into one continuous and seamless tube. The tube is then given a outer coat for corrosion and abrasion resistance. These lines are the strongest and safest avai; yet can still be easily bent without kinking or without damaging the outer coat. Some Toyota models come with a dual brake line system to the rear, this kit is for a single line system, you may be short a few lines if you have a dual system. This kit contains all the lines to do a wide variety of Toyota cars, and many different configurations, so you will have unused lines in any installation. These extra lines are a bonus that can be used for other projects The tubing is double walled, seamless and copper fused with a special inner and outer coating to provide protection from abrasion and corrosion. If you need a very sharp bend next to the flare at the end of the line, you will need a bender listed under "tools/supplies" on our Ebay store. All unions are solid brass to stop rust. All lines are made in USA or Canada and are the stock 3/16" outer diameter with a factory flare. Fits the years: 72 1972 73 1973 74 1974 75 1975 76 1976 77 1977 78 1978 79 1979 80 1980 81 1981 82 1982 83 1983 84 1984 85 1985 86 1986 87 1987 88 1988 89 1989 90 1990 91 1991 92 1992 93 1993 94 1994 95 1995 96 1996 97 1997 98 1998 99 1999 Please be specific and include the item # EE23391 in any correspondence Powered by SixBit's eCommerce Solution

Price: 274.99 USD

Location: Duluth, Minnesota

End Time: 2024-08-29T18:49:06.000Z

Shipping Cost: N/A USD