Dentex Dental Universal Cure Light Composite Resin Kit A1 A2 A3 A3.5 B1/Etch 37%

Description: Acid Composite Etching Gel 37% Features: Dentex etching gel is a polymer thickened gel for use on enamel and dentin. This gel will effectively treat enamel and dentin, producing the necessary microretentive surface for successful bonding. Packages: Refill: 5 ml/syringe, Instruction X1 Indications: The polymer thickener creates thixotropic properties, enhancing handling characteristics. The etchant rinse away cleanly and quickly, leaving no residue. Treat dentin and enamel, Treating agent on dental restorative material. 1. Isolate tooth and then prepare the cavity in a conservative manner. clean the entire surface with a slurry of pumice 2. Apply etchant using a tip, a disposable syringe tip, or disposable brush tip. allow etchant to remain in palce for 15 seconds. Option: place etchant enamel first, then proceed to cover dentin, for a slightly longer enamel etching time. 3. Rinse thoroughly (at least 5 seconds) to completely remover all traces of etchant. 4. Remove exces moisture from the tooth and proceed with the applicaton of etching gel, waiting for 10 seconds, then rise thoroughly. then apply adhesive. ************************************************************************************ Dentin Enamel Resin Bonding Adhesive Description: 1. 5th generation adhesive for all classes of direct restoration. 2. Post and core bonding. 3. Ceramic veneer/crown/inlay and other indirect restoration bondings. Advantages: 1. High bonding strength and long lasting durability. 2. Easy infiltrate to dentin tubules.Reduce the risk of post-operative sensitivity. 3. Compatible with all light cure restoratives. 4. Time saving and easy to use. Usage: 1. Enamel bonding :30 seconds DX.Etch37 etch on enamel then apply 5th generation adhesive. 2. Dentin bonding:15 seconds DX.Etch37 etch on dentin then apply 5th generation adhesive. Package:5ml/Bottle ************************************************************************************ Universal Light Cure Composite Resin Specifications: * Universal composite for anterior/posterior dentine and enamel * High radiopacity * Fluoride release. * High strength (compressive strength>480MPa) Indications for Use: * Direct anterior and posterior restorations * Compatible with glass ionomer resin material * Cup buildup * Core buildup * Indirect anterior and posterior restorations including inlays, onlays and veneers. Color Available: A2,A3, A3.5, B1 ************************************************************************************ Light Composite Resin Kit Direct restoration for all class caries. Restoration of teeth defect and veneer. Package: REFILL: Light Cure Composite: 4g/Syringe*5 Syringe Needles : 5pcs/ box*1 Total Etching Adhesive: 5ml/Bottle*1 Etching Gel: 2.5ml/Syringe*1 Applicators Brushes: 20pcs/box*1 Net weight: 188.4g COLOR: A1,A2,A3,A3.5,B1 FEATURES & ADVANTAGES: Unique dispersion technology ensure the filler evenly distributed Radioopaque and fluoride releasing Optimal polishability and high shade stability. Excellent handling, not sticky to instrument; Suitable for most cases of restoration, extensive indication of usage. INSTRUCTIONS： (1)Preparation: isolate and prepare tooth. (2)Cleaning: rinse the preparation with water. (3)Drying: gently air dry until there is no visible water.Do not allow enamel or dentin to dry for an excessive period of time. (4)Applying Dentex Self-Etching Light Cure Adhesive (DSA): dispense 1-2 drops of DSA into a mixing well, apply enough DSA to the entire preparation with a little brush until a shiny surface is achieved and then wait for 10 seconds (DSA should not be applied too much ). Use a gentle stream of air to evaporate the solvent for 5 seconds. (If using a non self-etching adhesive, an etching step should be used according to the manufacturer's instruction). (5)Cure: light cure for 20 seconds at 500±50mW/cm2. Keep the distance to exposure surface less than 4 mm. (6)Applying Dentex light cure composite (DLC): place selected DLC into cavity preparation following by light cure. According to following table, the curing time is recommended for different depth and color shades. In order to reduce shrinkage stress, for a large cavity, an increment filling is recommended. In general, 1-2 mm increments are placed into cavity preparation from different sides and the restoration is built incrementally. Each increment is light cured for 30 seconds. (7) Finishing: after light cure, adjust restoration. (8) Polishing: use polishing strip or disc to polish the surface FDA Statement The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. Seller name:wangjingren City,State:Huanghua City，Hebei Province，China Telephone number:86-15369180911

Price: 9.99 USD

Location: South El Monte, California

End Time: 2024-02-06T16:00:13.000Z

Shipping Cost: 0 USD