Gordon Glass® 3" Satin Anodized Frameless Shower Door Pull Handle Kit for 3/1...

Description: Gordon Glass 3"Satin Anodized Frameless Shower Door Pull Handle Kit For Retrofit or New Installation No Glass Fabrication Required Please note: this shower door pull handle does not include a magnet or a strike plate Material: Aluminum Finish: Satin Anodized Handle Size: 3 in Kit includes: 3" Frameless Shower Door Pull Handle Rubber Gasket - for use with 1/4" thick glass Clear 100% Pure RTV Silicone Sealant (0.5 oz. Squeeze Tube) for use with 3/16" and 5/16" thick glass Installation Instructions: The included rubber gasket is for 1/4" glass only; for 3/16" or 5/16" use provided silicone For 3/16" and 5/16" glass: Run two beads of silicone along the inside walls of the pull handle; position and slide over the edge of the glass. Tape the handle in place to prevent sliding and allow 24 hours to cure. For 1/4" glass: Place the rubber gasket over the edge of the glass on the desired area and apply the handle over the gasket (this may require gentle tapping with a rubber mallet). For Retrofit or New Installation No Glass Fabrication Required The included rubber gasket is for 1/4" glass only; for 3/16" or 5/16" use provided silicone Material: Aluminum Finish: Satin Anodized Handle Size: 3 in Please note: this shower door pull handle does NOT include a magnet or a strike plate Installation Instructions: The included rubber gasket is for 1/4" glass only; for 3/16" or 5/16" use provided silicone For 3/16" and 5/16" glass: Run two beads of silicone along the inside walls of the pull handle; position and slide over the edge of the glass. Tape the handle in place to prevent sliding and allow 24 hours to cure. For 1/4" glass: Place the rubber gasket over the edge of the glass on the desired area and apply the handle over the gasket (this may require gentle tapping with a rubber mallet).

Price: 22.07 USD

Location: Eugene, Oregon

End Time: 2024-11-27T21:45:00.000Z

Shipping Cost: 0 USD