Hybrid Racing K-Series Idler Bracket & Pulley Kit

Description: Product Information:Strength & Flexibility We tackle one of the most common K-Swap issues with a new look and fresh idea. Our idler bracket and pulley kit was designed to take the guesswork out of a reliable belt tensioner system. It's simple. Keep the OEM belt tensioner and alternator in place. Our bracket replaces the power steering pump, and our guide helps you find the right belt that puts it in the OEM system in the proper tension window. No more worries about your alternator falling, belt walking, or charging issues. We also altered the geometry to We created two kits for the modern K-Swap. One for pretty much all engines sold in the USA, Japan, and Europe and another kit specifically for the common JDM K24A engine. HYB-IDB-01-02This kit will be the most common setup used. Since it fits nearly all the known K-Series water pump housings and engines it will likely be the most popular. Known to fit the K20A, A2, A3, Z1, Z3, Z4 & K24A1, A2, A4, A8 means you will just need to measure your crank pulley to have a bolt-on solution. This kit requires no modifications to your water pump housing or any other accessory part.Improved hood clearance saving over 1.5" compared to a stock power steering pulley. It's also 0.5" shorter than the OEM EP3 idler bracket and pulley. HYB-IDB-01-04This kit was specifically designed to fit the JDM K24A engine. This engine was never offered in the USA, however, has become very popular with engine importers. The HYB-IDB-01-04 includes a specific spacer bracket designed to be used on this engine only. From our research, there is no other engine like this in the US, therefore no other OEM option that we have tested worked. Our kit improves hood clearance by being 1.81" shorter than the factory K24A power steering pump. How to choose the correct belt:This kit does not include a belt; however, we do offer a bundle package that can include a belt if you choose. You will need to follow these steps to determine which belt to use on your specific engine. 1. Determine what engine you are using. (K20 or K24) 2. Determine if you are using AC or not. 3. Measure the outside diameter of the crank pulley. 4. Refer to the belt sizing chart to pick the correct size based on which kit you have and the diameter of the crank pulley. *If your crank pulley is not listed, we do not offer a belt size. The process to find a belt is the same, you'll just need to source it on your own.PS & AC Removal Belt SizesThese belts are sized specifically for the Hybrid Racing Idler Bracket & Pulley Kit. We offer four sizes that fit nearly all K-Series engines without AC. HYB-IDB-01-02 (Fits most K-Series engines Except K24Z3)5.8" Crank pulley -> Use belt HYB-BLT-00-01 -> 50.0" Length (7PK1270/500K7) 6.25" Crank pulley -> Use Belt HYB-BLT-00-03 -> 51.2" Length (7PK1300/512K7)6.50" Crank pulley -> Use Belt HYB-BLT-00-04 -> 52.0" Length (7PK1320/520K7)PS Removal With AC Belt SizesWe do not offer these belts, however, you can use these part numbers to cross-reference or find an OE quality application. Kit Part Number: HYB-IDB-01-02 (Most K-Series Engines - Except K24Z3)5.8" Crank Pulley - Bando 7PK16356.25" Crank Pulley - Bando 7PK16506.50" Crank Pulley - Bando 7PK1660 Application: K20A2/A3/Z1/Z3 & K24A2/A4/A8 (USDM) Shipping:We may either ship through USPS, UPS, or FedEx at our own discretion.Products are usually shipped out Monday – Friday. Please contact us through email for assistance regarding other shipping methods. Return policy: When receiving your package, please open all of the boxes immediately to check if all the contents are inside and not damaged. All damaged or defective items must be reported within 2 business days from the day the packaged is delivered. If the package appears to be damaged on the outside, please refuse to accept it from the carrier; or please make sure when signing the shipper's proof-of-delivery slip, you include a note stating that the package is or appears damaged. If you do accept a damaged shipment, please inform us immediately. Depending on the product and where/how it was shipped, it may be necessary for you to deal with the carrier. If the product received is defective, a replacement will be sent as soon as possible. If you decide to return the defective item, rather than replace it, a restocking fee will be assessed (15-50% depending on the item) and your original shipping and processing charges will not be refunded. Also, returned products must be in its original packaging which allows us to re-sell the product. We will refuse any damaged or products that are not in good condition. If after 30 days of receiving your product, it proves to be defective, we would like for you to deal with the manufacturer. They will inform you on how to proceed based on their policies. If you are unhappy in any way, please contact us through eBay messages. We will provide you instructions on how and where to return the product.

Price: 204.24 USD

Location: Covina, California

End Time: 2024-09-16T21:11:41.000Z

Shipping Cost: 0 USD