Description: Distributor includes cap and rotor with brass terminals, It has a fully adjustable mechanical advance, Specifically designed for the 1949-1953 Flathead Ford V8, 12-volt coil features an oil-filled design and arc resistant alkyd top for superior performance, insulation and cooling, Wires have a 7mm suppressive core that will go through your looms perfectly Mallory Unilite Distributor, Coil & Wires, 1949-53 Flathead Kit Sku # 9100193 Mfr. Part # 9100193 Condition New Brand Speedway Motors Sold Kit Details Info Distributor A legend returns - the tried and true Mallory Unilite Distributor line is back! The easy three wire hookup of the Unilite makes running a stock coil, a Mallory performance coil and even a Mallory HyFire CD ignition a snap. Supplied with a quality cap and rotor, the Mallory Unilite also provides a fully adjustable mechanical advance to dial in the perfect timing curve for a multitude of engine combinations. The Unilite features a compact housing that lends itself well to applications where space is a premium due to tight firewall clearance or blower applications. Fits 1949-53 Flathead Fords Electronic ignition with a one-piece self-contained optical pickup and module Quick and simple 3 wire hookup Includes cap and rotor with brass terminals Compact design for tight clearance applications such as blowers and tight firewall clearance Fully adjustable mechanical advance Classic Mallory look and styling Strong .500”, QPQ coated distributor shaft guided by a ball bearing for long life and great performance Drive gear included “Install a Ballast Resistor Part No. PN 547 8214 in the wire between the ignition switch and the coil (+) terminal. Failure to use an ignition ballast resistor (or coil with 1.4 ohm primary resistance) will eventually destroy the UNILITE Ignition Module.” Ignition Coil Universal Street Performance Chrome Ignition Coil For UNILITE, Magnetic Breakerless (MBI) Distributors, And Conversion Kits Universal, 12-volt coil features an oil-filled design and arc resistant alkyd top for superior performance, insulation and cooling. This coil is specifically designed to deliver optimum performance when used with: Mallory UNILITE Distributors Magnetic Breakerless Ignitions (MBI) Mallory Point-type distributors Mallory Electronic Ignition Conversion Kits Bolt-on Mallory performance canister coil Universal, 12-volt coil features an oil-filled design and arc resistant alkyd top for superior performance, insulation and cooling. Nostalgia Mallory apperance Universal, 12-volt coil features an oil-filled design and arc resistant alkyd top for superior performance, insulation and cooling. Nostalgia Mallory apperance Spark Plug Wires Finally, a set of 7mm supression spark plug cables as a universal plug wire kit for your Flathead. We started with black, 7mm suppressive core wire that will go through your looms. The 90° black plug boots are installed but you have to install the straight or 90° distributor ends. We even put in enough wire to place your coil on the firewall. Comes with straight boots for the distributor end of the plug wire. Black only. Two sets of boots/terminals are included, one set for conventional socket-type caps and one set for HEI type caps. The set includes 9 cables, the longest being 51" and the shortest being 24". Use eight for the plugs, one for the coil. Learn how to properly attach new spark plug terminals and boots by reading our tech article. Charts (PDF) (PDF) Installation Tips IMPORTANT! FAILURE TO FOLLOW THIS WILL RESULT IN DAMAGE TO YOUR DISTRIBUTOR! Before installing the UNILITE Distributor, make sure that your vehicle is equipped with an ignition ballast resistor (or loom resistance wire) in the wire between the ignition switch and the coil (+) terminal. Check a service manual for your vehicle to locate the ignition ballast resistor (or loom resistance wire). If your vehicle is not equipped with an ignition ballast resistor, install a Ballast Resistor Part No. PN 8214 in the wire between the ignition switch and the coil (+) terminal. Failure to use an ignition ballast resistor will eventually destroy the UNILITE Ignition Module. Specs Advance Type Mechanical Sold in Quantity Kit Distributor Cap Color Red Mechanical Tach Drive No Slip Collar No External Ignition Box Required No Marine Use No Shaft Diameter 0.5 Housing Finish Natural Gear Rotation Standard Housing Material Billet Aluminum Trigger Style Optical Coil Included Yes Cap Type Socket / Female MFG. Part # 9100193 Reviews Yes I would buy again. Rated by Butch on February 17, 2022 Summary: Quality merchandise friendly staff. Yes, I recommend this product. Tech Support We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 72 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Price: 624.99 USD
Location: Lincoln, Nebraska
End Time: 2024-11-17T13:02:16.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Brand: Speedway Motors
Type: Distributors
Manufacturer Part Number: 9100193
California Prop 65 Warning: False