Description: Saniflo Sanipack In Wall Macerator The SanifloStore is The Original Online Stocking Distributor for Saniflo SFA. We Know Saniflo! If you have questions about the Saniflo product line feel free to call us anytime. Part# 011Model: SanipackWarranty: 5 Year on Cutting Blades, 3 Year on pumpWall mounted toilet is not included, you are free to choose the model you would like which would then drain into this pump. Product Description The Sanipack is a macerator device which is meant to be installed inside a wall cavity. The Sanipack is a system that is used to install a complete bathroom up to 9 feet below the sewer line, or even up to 100 feet away from a soil stack. It can handle the effluent from a toilet, sink and shower. The Sanipack is simplicity itself to install; there are just four connections. The macerator/pump is connected to the discharge pipe coming from a wall hung toiletThe toilet tank is connected to the water supplyThe macerator/pump is connected to the small diameter discharge pipe workThe macerator/pump is connected to the electrical supply The inside of the Sanipack is comprised of a pressure chamber, which starts and stops the unit, and the motor, which drives the stainless steel macerator blades and the pump. When the flush is activated, the water flowing into the Sanipack activates a micro switch in the pressure chamber which in turn starts the motor. The motor is sealed for life in an oil filled enclosure. A common spindle/shaft drives the impeller and the macerator blades. The moving parts therefore are kept to an absolute minimum. Water and organic waste matter enter the chamber and are reduced to slurry as the macerator blades rotate at 3600 RPM. The centrifugal force causes the reduced solids to be ejected through a grill into the container where it is picked up by the impeller pump mounted beneath the motor. The unit pumps the effluent upward to 9 feet and/or 100 feet horizontally (with gravity fall). Once the water is discharged and the water level in the container goes down, the micro switch deactivates the unit until the flush is activated again. A normal operating cycle for Sanipack takes about 7-9 seconds depending upon the discharge pipe run configuration; power consumption is therefore minimal. In addition to the toilet waste, the Sanipack will also discharge gray water from a variety of other sanitary fixtures such as: a sink, a shower and a urinal. When adding a shower, a base will have to be constructed. This base should be made out of a 2" x 6" (minimum) or 2” x 8” (recommended) on edge, to allow for the installation of a P-trap and the required 1/4”per foot gravity flow towards the pump unit. The wastewater from other sanitary fixtures is discharged into the Sanipack via two 1-1/2 inch inlets on either side of the housing. Either one or both inlets can be used as required. The discharge elbow on top of the Sanipack can be turned either to the left, to the right, or towards the back, depending on the discharge installation. A non-return valve, which comes already assembled on the discharge elbow, prevents back flow into the unit. This unit has been designed with a vent connection on the lid. All plumbing codes require connection to a vent system. Please note that the vent system should be a two-way air vent. The use of mechanical vents, air admittance valves or similar devices are not permitted as these are considered one-way air vent systems. It is also highly recommended for the macerator/pump to be connected to a Ground Fault Interrupter (GFI) circuit. The Sanipack is designed to be used with a wall hung toilet. The depth of the case allows for this pump to be installed within the wall. Since the reservoir, the macerating pump and the pipes are hidden from view, this type of installation gives you the lean and clean look of a European bathroom. The Sanipack has been certified to American and Canadian Standards. Macerating standard; US: CSA Certified & IAPMO (UPC) listed - ASME A112.3.4, CA: Macerating Standard CSA B45.9. _______________________________________________________________________________________________________________________________________________________________________________________ Shipping Items are usually shipped the same day if the payment is made by 3pm EST We ship via Fed Ex and USPS. Tracking information is always sent to your email address. Please check any spam filters as it may end up there. If you need a package overnighted or expedited let us know. Please notify us prior to payment so we can invoice you for the additional charges. International buyers are responsible for all tariffs, duties, taxes, fees and Vats. Customs forms will be completed in accordance with US law. We can only ship to confirmed Paypal addresses. If paying by Paypal, please do not send payment until your Paypal address is confirmed. You are more then welcome to save on shipping and pick your items up at our facility during business hours M-F 9-4. Please contact us for directions. We will combine shipping for multiple purchases. Large ticket items will ship with signature confirmation required. Sales Policy Items are described to the best of our ability, if you have a question about an item please do not hesitate to ask. If you have a specific question on the use and or installation of an item, please refer to the manufacturer's website. If you have zero feedback, please contact us before bidding on or buying an item. Please know exactly what you are buying. On every listing we will include the manufacturer's part number. Please do whatever research you need to on the respective parts before purchasing. Please do not purchase something unless you intend on paying for it. Please read all the policies, conditions, additional terms of sale, etc. prior to bidding/buying. If an item is posted for an auction please do not ask for a Buy It Now price. Please contact us in advance with any questions, our (toll free) number is 866-658-0505 Payment policy Payment is expected within 5 days of auction's close or Buy It Now. Paypal is our preferred payment method. Credit Cards are accepted and must be called in to our office between 10am - 4pm EST, Monday - Friday 866-658-0505 Wire transfers are accepted, please contact us for more information if you would like to pay via wire transfer. Cash for pick ups at our location is OK, but please have exact cash on hand. Return policy If an item is received by you as not working, damaged from transit, not as described, etc. please contact us immediately. Returned items must be approved and must accompany the Return Authorization Number (RMA#) we provide. If an item is defective a replacement will be shipped when the defective item is received back to us. If a replacement is not available, a refund will be granted when the defective item is received back to us. · Unauthorized returns, or items returned for reasons other than defect, damage or inaccurate description are subject to 15% restocking fee plus any shipping costs that we incurred shipping the items to you Normal 0 false false false EN-US X-NONE X-NONE
Price: 1071.14 USD
Location: North Hampton, New Hampshire
End Time: 2024-11-24T16:11:10.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: saniflo
Type: Macerator
Model: Sanipack
MPN: 011
Country/Region of Manufacture: France