Pre-owned JUKI LU 1508NH Extra Heavy Duty Lockstitch Sewing Machine

Description: Pre-owned Juki LU-1508NH Unison-feed Extra heavy duty Single Needle Walking Foot Lockstitch Industrial Sewing Machine. Machine comes with brand new table set and brand new 750W servo motor attached with needle positioner. Machine in good condition, works great. We can ship the machine to you. Please contact for shipping information before you place an order. The basic machine and its outstanding response to the sewing of heavy materials. JUKI's unique feed mechanism promises excellent efficiency of feed. The machine is applicable to an extended range of heavy materials for industrial use, such as cargo handling belts and containers, as well as those for general use, such as car seats, sofas and bags, thereby contributing to both improved quality and increased productivity. A new feed mechanism with a rectangular feeding motion prevents stitch gathering. The new mechanism with a rectangular feeding motion promises consistent feed of materials of all thickness without stitch gathering. The lower orbit of the feed dog prevents the material from flopping and reduces operating noise and vibration. Compared with the elliptical feed, the rectangular feed helps reduces gathered stitches. The alternating vertical movement mechanism prevents irregular stitches. The machine has adopted a new mechanism that does not change the ratio of alternate vertical movement of the walking foot and presser foot even when the material thickness changes. Even when a heavy-weight material is used, the presser foot lift does not decrease. This means that the presser foot comes into contact with the material at exactly the same time that it does when sewing lighter-weight sections of the material. As a result, the walking foot retains the material with a consistent pressure to prevent irregular stitches. The amount of the alternating vertical movement of the walking foot and presser foot can be adjusted up to the maximum of 6.5mm according to the height of multilayered portions of material. Consistent seam quality. With the adoption of a new rectangular feed mechanism, an alternating vertical movement mechanism, and a unison feed mechanism, the machine can feed heavy materials powerfully and smoothly. Well tensed seams are consistently produced without pitch errors. With its maximum stitch length of 9mm, the machine can be applied to a broader range of uses. 1-needle, Unison-feed, Lockstitch machine with Vertical-axis Large Hook The maximum stitch length is 10mm. The complete rectangular feed locus enables accurate feed of extra heavy materials while preventing stitch gathering. With its sufficient needlebar stroke of 38mm and long 190R needle, the machine supports the sewing of extra heavy materials. The machine comes with an extra large steel handwheel with a diameter as large as φ175. Improved operability. The stitch length can be easily selected by the stitch dial. The machine is provided with many improved features that offer enhanced operability such as an easy-to-observe area around the needle, placement of the bobbin winder on the front face of the machine arm, and a large handwheel (φ160). A knee-lifter mechanism is built in the bed. This reduces the pressure required to operate the knee-lifter and facilitates setup. (Machines equipped with automatic thread trimmer are excluded.) The machine is full-open-type top design makes it possible to fully open the top of the machine arm. Thanks to this design, adjusting works can be done without tilting the machine head. The machine is equipped as standard with a safety clutch for preventing hook breakage. Reset work can be done simply by pressing a button. Standard Package Standard machine will come with machine head, table set, thread stands, servo motor, led light. Assembled and shipped by pallet. ***Please be advised that this is industrial equipment. Minor blemishes and scratches on the table and legs may occur during the production process, and these do not indicate any defect or deficiency in the operation of the unit. ***

Price: 2150 USD

Location: San Dimas, California

End Time: 2024-12-11T18:41:52.000Z

Shipping Cost: N/A USD