RadioMaster RP3-H ExpressLRS Receiver

Description: RadioMaster RP3-H ExpressLRS Receiver Designed specifically for use with our Nexus Helicopter Flybarless control unit and compatible with all CRSF/S.BUS enabled flight controllers the RP3-H ExpressLRS receiver comes with a built-in TCXO and an integrated housing design that makes the receiver tougher and ready to mount in modern helicopter frames. With the RP3-H receiver, you can get reliable, stable, and accurate signal reception, which enhances your flight experience and allows for superior performance even in demanding environments. The RP3-H also features an Ext-V telemetry input for compatibility with older ESCs that do not provide battery voltage telemetry via the control unit. The RP3-H receiver uses the Skyworks SKY66112 power amplifier to increase telemetry performance, the PA provides up to 100mw of telemetry power, and antenna switching for antenna diversity. It is developed around the ESP8285 MCU and SX1281IMLTRT RF Chip, offering Lora and FLRC 2.4GHz RF links that provide incredible range and low latency. With Wifi built-in, firmware updates can be done on your craft without the need to remove the receiver. Features Perfect for helicopters and any application that needs a rugged cased serial receiver Plug'n'play solder free RP3-H ExpressLRS receivers compatible with NEXUS Heli flight controller Optimized PCB design for better heat dissipation LNA for better receiver range PA for better telemetry range Antenna Diversity for improved signal stability and range Built-in a TCXO (temperature compensated crystal oscillator) Automatically detects voltage telemetry of external battery voltage or receiver battery/ESC BEC voltage Compatible with all 2.4GHz ExpressLRS modules and transmitters with built in 2.4GHz ExpressLRS Specifications Item: RP3-H ExpressLRS 2.4GHz Nano Receiver Type: ISM MCU: ESP8285 RF Chip: SX1281 Telemetry RF power: Max 100mW Antenna: 150mm 2.4GHz Antenna x2 Frequency Range: 2.404 - 2.479 GHz Maximum receive refresh rate: 500Hz / F1000Hz Minimum receiver refresh rate: 25Hz Working voltage: DC 4.5 - 8.4V Battery voltage detection range: DC 4.0 - 35V Weight: 5.1g (Including two antenna) Dimension: 28mm*24mm*8mm Firmware Version: ExpressLRS v3.3.1 pre-installed FW Target: RadioMaster RP3-H Diversity 2400 RX Bus interface: CRSF/S.Bus TCXO (temperature compensated crystal oscillator) The TCXO ensures high stability and accuracy in frequency control, compensating for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. Click here to learn more about the TCXO. Dimensions RadioMaster RP Series Receivers RP1 ELRS 2.4ghz Nano Receiver RP2 ELRS 2.4ghz Nano Receiver RP3 ELRS 2.4ghz Nano Receiver RP4TD ELRS 2.4ghz Diversity Receiver RP3-H ELRS 2.4ghz Nano Receiver Package Includes 1 * RP3-H ExpressLRS 2.4GHz Nano Receiver 2 * 150mm IPX1 2.4GHz T Antenna (installed) 1 * JST-GH CRSF 4 wire Pigtail 1 * JST-GH 4 wire to JST-GH CRSF cable 1 * JST-GH 4 wire to single Servo pin (single dupont connectors) 1 * Voltage telemetry wire 1 * Quick start guide RadioMaster RP3-H ExpressLRS Receiver Designed specifically for use with our Nexus Helicopter Flybarless control unit and compatible with all CRSF/S.BUS enabled flight controllers the RP3-H ExpressLRS receiver comes with a built-in TCXO and an integrated housing design that makes the receiver tougher and ready to mount in modern helicopter frames. With the RP3-H receiver, you can get reliable, stable, and accurate signal reception, which enhances your flight experience and allows for superior performance even in demanding environments. The RP3-H also features an Ext-V telemetry input for compatibility with older ESCs that do not provide battery voltage telemetry via the control unit. The RP3-H receiver uses the Skyworks SKY66112 power amplifier to increase telemetry performance, the PA provides up to 100mw of telemetry power, and antenna switching for antenna diversity. It is developed around the ESP8285 MCU and SX1281IMLTRT RF Chip, offering Lora and FLRC 2.4GHz RF links that provide incredible range and low latency. With Wifi built-in, firmware updates can be done on your craft without the need to remove the receiver. Features Perfect for helicopters and any application that needs a rugged cased serial receiver Plug'n'play solder free RP3-H ExpressLRS receivers compatible with NEXUS Heli flight controller Optimized PCB design for better heat dissipation LNA for better receiver range PA for better telemetry range Antenna Diversity for improved signal stability and range Built-in a TCXO (temperature compensated crystal oscillator) Automatically detects voltage telemetry of external battery voltage or receiver battery/ESC BEC voltage Compatible with all 2.4GHz ExpressLRS modules and transmitters with built in 2.4GHz ExpressLRS Specifications Item: RP3-H ExpressLRS 2.4GHz Nano Receiver Type: ISM MCU: ESP8285 RF Chip: SX1281 Telemetry RF power: Max 100mW Antenna: 150mm 2.4GHz Antenna x2 Frequency Range: 2.404 - 2.479 GHz Maximum receive refresh rate: 500Hz / F1000Hz Minimum receiver refresh rate: 25Hz Working voltage: DC 4.5 - 8.4V Battery voltage detection range: DC 4.0 - 35V Weight: 5.1g (Including two antenna) Dimension: 28mm*24mm*8mm Firmware Version: ExpressLRS v3.3.1 pre-installed FW Target: RadioMaster RP3-H Diversity 2400 RX Bus interface: CRSF/S.Bus TCXO (temperature compensated crystal oscillator) The TCXO ensures high stability and accuracy in frequency control, compensating for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. Click here to learn more about the TCXO. Dimensions RadioMaster RP Series Receivers RP1 ELRS 2.4ghz Nano Receiver RP2 ELRS 2.4ghz Nano Receiver RP3 ELRS 2.4ghz Nano Receiver RP4TD ELRS 2.4ghz Diversity Receiver RP3-H ELRS 2.4ghz Nano Receiver Package Includes 1 * RP3-H ExpressLRS 2.4GHz Nano Receiver 2 * 150mm IPX1 2.4GHz T Antenna (installed) 1 * JST-GH CRSF 4 wire Pigtail 1 * JST-GH 4 wire to JST-GH CRSF cable 1 * JST-GH 4 wire to single Servo pin (single dupont connectors) 1 * Voltage telemetry wire 1 * Quick start guide × × × × × × × × × Buy now and save! Shipping info Click the Shipping & Payments tab above the listing description for more info Click the Shipping & Payments tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYMENT Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Additional Information No additional information at this time Ask seller a question You might also like T-Rex 550L Bearing Block (Upper) - Trex 550L Dominator Protos 700 M3x8 Socket Head Cap Screw Combo of FURITEK IGUANA PRO 30A/50A BRUSHED ESC FOR AXIAL SCX24 with Bluetooth SAB Sticker Raw 580 Orange Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © HeliDirect Shipping & Payments Click the Shipping & Payments tab above the listing description for more info Payment Accepted Payment Methods Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Returns Returns are accepted Items must be returned within 30 days of the auction ending Buyer will pay for return shipping. Additional Information: HeliDirect offers a (14) day return policy for all new, unuséd items that are in brand new condition without fault, damage or otherwise. Items being returned must be brand new without any use. Any kits that have been partially or fully built, items that have been soldered, batteries that have been soldered or charged, or products that have been cut, punctured, modified or otherwise, will not be accepted as a return. Aircraft that have been “test flown” will not be accepted as a return item. - Valid returns are based upon factory sealed products that are in 100% resale condition. We will charge 20% restocking fee for this case. Shipping fee wont be refunded. - If the item(s) received has been opened, uséd or damaged, no return options will be offered. Outside of warranty, any item without fault or warranty related issue cannot be accepted back unless the item is in brand new condition, as we cannot offer an opened or uséd item to our customer base. - If a non warranty item is being returned based upon valid return guidelines (brand new, unuséd, factory sealed packaging), the original shipping fees paid by HeliDirect (if Free Shipping was uséd) will be deducted from the overall sum total. If the customer paid for a specified shipping method, these shipping fees will not be valid for a refund. ***Returning Fragile Items - In regards to returning fragile items that can be easily damaged, it is the customer’s sole responsibility to ensure that the package is packed and sealed safely, as any damage via return shipping will not be accepted. If a damaged item is received, it will be returned to the original shipping address, and will need to be settled via the customer through the shipping agent uséd. HeliDirect will not be involved in any claims, refunds, credits or otherwise for return shipping damage. *** Warranty Returns - Faulty / Damaged Item(s) Received - For any item that is faulty, damaged, or falls relating to warranty related issues, please contact our customer service department for help, and we will be sure to assist you in every way possible in regards to the matter at hand. - Please note that certain / select products we carry may be replaced or repaired direct via the manufacture, no matter when the item / product was purchased. In this case, feel free to contact us for help, and we will issue you the proper contact information so the item can be addressed via the manufacturer. However, we will be certain your warranty is properly addressed. - For valid returns, once an RMA number is received, please ship back to us via standard shipping – no upgraded shipping method, such as 2nd Day Air, Overnight, or EMS will be credited or refunded. Returns can take several days to be processed. - For DJI brand, please contact directly DJI service center. ***Return Processing Requiring Product Testing - For any item requiring testing,as the testing process via our in house technicians will require the necessary time to problem solve your return. Our goal is to isolate whatever trouble your item(s) may be experiencing, and as soon as we have the available information to proceed, you will be updated regarding this. RMA Number Information All approved return items will require an RMA number before being shipped back to our location. This number aids us in the ability to properly handle your return. Without an RMA number, your package has a probability of being mis-handled, lost or delayed, and HeliDirect will take no responsibility for any return that does not have an approved RMA number. Please contact our staff for proper RMA information, as we are happy to help you. ***Note; For all return products without contact us before. It means you violate our return policy. eBay integration by

Price: 19.99 USD

Location: Middletown, Indiana

End Time: 2024-09-13T09:25:03.000Z

Shipping Cost: N/A USD