Description: This listing is for a shim pack of 30 Stainless Steel Shims. All the washers have a 1/8" ID hole and fit many airguns that use 1/8" OD pins. There are 5 different thicknesses which allows you to select what you really need.A total of 30 washers, 5 different sizes, 6 washers of each size. There are 6 washers .002 thick, 6 washers .004 thick, 6 washers .008 thick, 6 washers .012 thick, 6 washers .018 thick. Just like the Main Photo shows. Here is what I do:I take all the side to side play out using a combination of whatever shims I need. With the 3 plate screws tight I like the trigger and sear to be ever so slightly snug. Make sure you are not bowing the plate. Then I disassemble it. I then clean the stamping flash off each washer. I use the end of my finger and slide the washer back and forth over 2000 or 3000 grit paper. I do the same with the sides of the trigger and sear. Then the trigger and sear get polished. Then everything is lubed, reassembled and tested. If necessary, the process is repeated until they are perfect. Always make sure the trigger spring can return the trigger. These fit over a 1/8" OD pin typical on the Crosman 2240, 2250, 2300, 2400, 1377, 1322. Other airguns as well. Please note:The sear and pin are not included and are just to show the shim to pin fit.
Price: 12 USD
Location: Meredith, New Hampshire
End Time: 2023-09-27T20:31:32.000Z
Shipping Cost: 3.99 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Unbranded
MPN: Does not apply
Country/Region of Manufacture: Unknown
