UV Resin Kit 200g with Light, Hard Type Kit, Upgraded

Description: UV Resin Kit 200g with Light, Hard Type Kit, Upgraded Product Details Brand: Honcaring Specific Uses For Product: Jewelry Material: Resin Compatible Material: Resin Item Form: Liquid Friendly Beginners UV Resin Kit: Honcaring UV Resin 200g Kit contains UV resin 100g*2, 8W UV resin light*1, silicone cup*2, disposable gloves*2, blue silicone mat*1. Want to get start UV resin art, try our Honcaring UV resin kit Easy to Use: No need to measure and stir like epoxy resin, UV resin is ready to use and can cure fast in minutes with UV light, later you can get beautiful DIY craft productions. Tools included will greatly help your crafts making Wide Applications: This UV resin can be used in many fields for its high hardness and fast curing feature, such as jewelry making, pendants, keychains, DIY craft, etc. Unleash your imagination to make your own resin crafts Less Bubble & Low Odor: Made by upgraded formula, this UV resin is low odor and has less bubble, helping you create more transparent and yellow-resistant UV resin crafts. With crystal clear UV resin, your DIY craft will be more attractive and long-lasting Tips: Make your the working place and tools clean and dry before using; remember to wear gloves and apron when crafting; store this UV resin kit in dry cool place. Please note that the actual curing time is affected by thickness, transparency, etc Some Q&A of your concern Q1：Why UV resin has been illuminated under UV light for a few minutes or even a few hours, still sticky, not curing? Several possible reasons for this: 1. Wrong molds. Molds that are large, deep or opaque are for epoxy resin crafts making, not for UV resin. 2. Wrong pigments. Not all pigments work with UV resin. Alcohol inks and opaque pigments are not recommended. If you need to use darker colors for your art, mix well and cure in layers. 3. Too much adding. Adding too much pigments, glitters, mica powder or other fillings, will lead to a light impenetrable mixture that hard to be cured. 4. Insufficient UV exposure. Please make sure both the upper and bottom side of your silicone mold get enough UV exposure. This means that after you cure the top, you have to cure the bottom, too. Cool down for about 5-7 minutes before next time curing is recommended. Q2: Why does UV resin have bubbles and how to get rid of them? The height of the pouring is too high, the mixing speed is too fast, low temperature increases the viscosity of UV resin, and other factors will lead to bubbles. Here are some tools may help: Resin Bubble Remover, Heat Gun, Dropper, Toothpick. Q3: How to clean the UV resin from hands? Special resin cleaner will help. If you don’t have it, please try: 1. Wipe off with paper towels immediately, rub with detergent, and rinse. 2. Wipe off with paper towels immediately, rub with medicinal alcohol or edible white vinegar, and rinse. 3. Wipe off with paper towels immediately, rub with cleansing oil, and rinse. 4. Wipe off with paper towels immediately, rub with flour or loose powder, and rinse. For your enjoyable craft experience, Honcaring sincerely recommends you, your friends and families put on gloves and apron, and tie up long hair before use.

Price: 27.12 USD

Location: New York, New York

End Time: 2024-12-05T17:00:21.000Z

Shipping Cost: 0 USD