VCP12K 12000W Lithium Charge Pump battery for Car Audio Amplifier HiPower System

Description: VCP12KMain Uses:Car Audio:12,000WattsHydraulicsHigh starting current inductive loads Nominal Voltage14.4V (2.4V/cell)Rated Capacity (20h @ 25C)12AHOutput Power (max)12.5 KW (SOC 50%, 10s, 25C/77F)Output Voltage Range9.0V-17.4VCharging Voltage14.4V - 17.4V (CC-CV)Cut-Off Voltage9VMax. Constant Charging Current120A Recommended Charging Current10A 50A Recommended Charger TypeCC-CV until current <0.24A (0.02C)Max. Constant Discharge Current240AMax. 10sec /3sec Discharge Current900A / 1440ACharging Temperature-30C ~ 50C (-22F~ +120F) Discharging Temperature-30C ~ 50C (-22F ~ +120F)Storage Temperature-30C ~ 45C (-4F ~ +113F) @ 40%-60% SOCCell Balancer1A. ActiveCycle Life @80% DOD~20,000 @ 20A, 25C (77F)Cycle Life @90% DOD>18,000 @ 20A, 25C (77F)Design Life~10 YearsBattery Case MaterialAluminumDimensions L x W X H18.1"w (19"TW) x 6.3"d x 8.5"h (9.1"TH)TerminalsM8 Screw In (~5/16")Weight15.5LBCharge Pumps are the latest in car audio power technology, a hybrid between a capacitor and a battery. VMAX Charge Pumps (VCP) are hybrid batteries designed to be installed in parallel with 12V batteries to improve and solve most of the problems associated with high power audio systems and loads with high current surges, in the same manner as stiffening capacitors. And just like capacitors, VCPs are also designed to be continuously recharged by the connected battery to deliver the high current surges needed by high power audio systems. Yet the main advantage over capacitors is the VCPs -acting as batteries- larger capacities of 6ah-18ah enabling them to deliver and sustain much longer power surges compared to the equivalent capacitors’ capacity of less than 0.4ah/100f. Introducing the VCP12K 12,000W Audio System Charge Pump, the latest breakthrough in power management for 12V mobile audio systems. The charge pump gives you the power of battery-stabilized performance without having to install a large bank of batteries. The VMAX Charge Pump is a hybrid battery designed to be installed in parallel with your 12V battery to improve and solve the issues associated with high power audio systems and loads with high current surges. It's like a capacitor, except it has a much larger capacity of 6ah-18ah, giving it the ability to deliver and sustain much longer and higher power surges compared to capacitors with a capacity of less than 0.4ah/100f. The VCP12K has a number of other benefits, including boosting current for 12V mobile audio systems, preventing power amplifier and subwoofer failures, extending the lifespan of your vehicle batteries, maximizing SPL levels, and preventing vehicle light flickering. With its high performance and reliability, the VCP12K is the perfect solution for those looking to get the most out of their audio system. The VCP12K 12000W Audio System Charge Pump from VMAX is a powerful device designed to give your audio system the boost it needs. This compact yet impressive powerhouse can deliver huge current surges of up to 120 times its rated capacity (120C), making it perfect for powering 12V mobile audio systems, hydraulics, and inductive loads. Furthermore, it can provide startup support for motors and inductive loads, while eliminating the need for large battery banks for high-power audio systems. It also extends the lifespan of vehicle batteries by avoiding deep discharges and preventing power amplifier and subwoofer failures due to low voltage drops. Thanks to its state of the art and specially designed LTO cells, balancers and components, this Charge Pump delivers fast charging of up to 10 times its rated capacity (10C). It can accept high voltage inputs of up to 17.4V and is safe to use with high output alternators. It also features a high energy density, small size, and a lightweight design. Additionally, it boasts a 20,000+ cycle life design life and is maintenance-free, with no “memory effect”. It works well with most types of 12V batteries, including AGM, Gel, Wet and other Lithium batteries. Upgrade your audio system with the VCP12K 12,000W Audio System Charge Pump from VMAX and get the performance and power you need! Advantages:1. Maximize SPL levels and minimize vehicle light flickering: VCPs help maximize the sound pressure level (SPL) produced by audio systems and minimize light flickering by delivering massive current surges to meet the demands of vehicle electronics and audio systems.2. Eliminate the need for large battery banks: By efficiently boosting and delivering high current surges, VCPs reduce the reliance on multiple batteries, saving space and cost.3. Minimize system failures: Voltage drops can cause power amplifiers and subwoofers to underperform or fail. VCPs help mitigate this issue by ensuring that the voltage supplied to these components remains at an optimal level, preventing performance degradation and potential failures.4. Increase the lifespan of vehicle batteries: VCPs play a protective role by preventing the batteries from experiencing deep discharges, thereby increasing their lifespan.5. Support motors, hydraulics and inductive loads during startup: VCPs provide the necessary current surges needed by motors and other inductive loads for smooth startup and operation.Overall, VMAX Charge Pump devices offer various benefits, including improved power delivery, protection for components, increased efficiency, and extended battery lifespan, making them valuable additions to systems that require high current surges and reliable power supply.Features:Utilizing state of the art and specially designed LTO cells, balancers and components, VMAX pumps are built to deliver unmatched performance and advantages including:Fast charging of up to 10 times rated capacity (10C).Accept high voltage inputs of up to 17.4V, making them safe to work with high output alternators.Deliver massive current surges exceeding 120 times rated capacity (120C).High energy density, small size, and light weight.20,000+ cycle life design life, stable performance, maintenance-free.Safe and wide temperature range exceeding those of LFP batteries.No “memory effect”; eliminating the need to keep them always fully charged.Work well with most types of 12V batteries; AGM, Gel, Wet and other Lithium batteries.Charging: Use of a Lithium charger is recommended, though AGM chargers are also acceptable. Vehicle alternators with 14.5 ~ 17.4V outputs. Reconditioning and float charging are not recommended. Disconnect charger after full charge. Charging before first use is recommended.Installation: Read unit technical data and specifications at vmaxtanks.com before use. Use the right gauge cables and fuses to connect your VMAX Charge Pump (VCP) in parallel with the existing 12V battery or power source. Use adequate screws to securely mount and install your VCP. Connect main battery cables to VCP terminals. An inline fuse is recommended (VCP6:100A, VCP9:100-150A, VCP12:150A, and VCP18: 200-250A) After connecting and wiring your system, connect system/load cable ends to VCP terminals. Ensure all terminals are tight and secure- do not overtighten. Fuse -at VCP terminals- all power cables connecting VCP to system/load (VCP6:150-200A, VCP9:200-250A, VCP12:250-300A, and VCP18: 300A+) The use of fuses is mainly to protect the cables against any accidental short circuit after installation. Refer to website for recommended fuse ratings. Up to four VCPs can be connected in parallel for larger systems. Do not connect in series. Check and tighten all screws and connections regularly.Warning: Do not connect in series with any other battery. Do not connect more than 4 VCPs in parallel. Do not short circuit, revers polarity, open or tamper with. Do not use in an environment where temperatures exceed 120F. Do not mount inside an engine compartment, or close to high temperature devices. Unit must be returned to VMAX USA or your Authorized dealer for any repair or service issues.

Price: 799.99 USD

Location: Detroit, Michigan

End Time: 2024-02-17T20:05:40.000Z

Shipping Cost: 0 USD